One of your computer's NetBIOS names is already registered on the remote network. !Note Deprecated in Windows Vista and later versions of Windows. ERRORSERVERGENERALNETFAILURE 643: A network adapter at the server failed. !Note Deprecated in Windows Vista and later versions of Windows. WARNINGMSGALIASNOTADDED 644. Jan 14, 2010 I'm running Windows 7 1. Suddenly my Windows Mobile Device Center Failed to recognize my phone and connect to sync. After some troubleshooting I realized the 'Microsoft Windows Mobile Remote Adapter Driver' Failed to work correctly Saying 'This device cannot Start (Code 10). Windows Mobile Device Center offers device management and data synchronization between a Windows Mobile-based device and a computer. For Windows XP or earlier operating systems, you must use Microsoft ActiveSync. Oct 25, 2016 Microsoft Windows Mobile Remote Adapter -from windows update Install failed - Where can I find this so I can retry to re-install - mobile device does not connect WINDOWS VISTA- verizon treo running windows mobile 6 professional CE OS 5.2.1620 (BUILD 18125.0.4.2). In most cases at this point, the Windows Mobile device will still not connect. If this happens, uninstall WMDC (Start-Settings-Apps, uninstall both 'Windows Mobile Device Center' and 'Windows Mobile Device Center Driver Update'), and then re-install WMDC using the same.exe. After this second install, WMDC should be working.
Microsoft windows mobile remote adapter failed All rem ote trademarks the worksheet, along microsoft windows mobile remote adapter failed. Microsoft Windows Mobile Remote Adapter - free driver download driver-category list Understand that the need for you to be familiar with precise kind of every single driver you're interested in obtaining is totally unnecessary and once you are considering utilizing an automatic scanner that performs this all for you and requires zero guidance.
I installed Windows Mobile Device Center 64-bit (v.6.1.6965) on my laptop (Windows 7, 64-bit).
When I plugged my Motorola docking station (for hand-held scanners) and docked an MC92N0 scanner, it took a few seconds to recognize the device, but worked fine.
I unplugged my Motorola docking station and plugged in an Intermec docking station to program some scanners, and they too worked fine.
I reverted back to the Motorola docking station, and now it won't recognize the scanners.
I've tried uninstalling, rebooting, and installing Windows Mobile Device Center 3 times already to no avail.
Any answers or thoughts would be great. Thanks.
user2271875Windows Mobile Remote Adapter Failed Windows 7
user22718756 Answers
I've run into situations where devices stopped working with WMDC/Active Sync.I've usually found success disabling 'Advanced Networking Functionality' on the device. On your device, tap Start > Settings > Connections > USB to PC > Uncheck 'Enable advanced network functionality'.
The other thing that usually causes this is the device drivers. When you plug in the device it tries to install device drivers. You may end up with a ton of 'Windows Mobile Remote Adapter #n' devices showing in Device Manager. You can clean these up because the device driver will be reinstalled next time you plug in the device. There is detailed information available about the process here. If the device driver is failing to install you should see a popup near the clock/system tray area.
If all else fails you can try an unofficial troubleshooting page here and here.
Trevor BalcomTrevor BalcomMicrosoft Windows Mobile Remote Adapter Failed
If these steps fail try a different battery in the MC9xxx unit.
Remember...all the actual contacts for communications are on the battery itself.
Was just working with a customer and tried everything....no dice...
Finally we popped a different battery in and Windows finally recognized it.
I got this working on Windows 10 (2019) after trying a lot of different things.What mostly worked was in services, there are 2 services called 'Windows Mobile-based device connectivity' and 'Windows Mobile-2003-based device connectivity'.
Right click on each service and make sure they start automatically (delayed).Click the 'log on' tab, change the access to be 'local system account and enable 'Allow service to interact with desktop'Apply and click ok.
Make sure the handheld is docked and the docking station is connected to your computer by USB.
Reboot you computer. N.B. This is the only way to reset the connection if it crashes or stops working.
After logging onto your desktop, give your computer a few minutes to start those services. When both are running, you will need to open the application 'Windows Mobile Device Center' to initiate the connection. This had be to open for this to work in my case.
You should see connected. Now, windows tends to update itself without your permission so what happens sometimes is the 'log on' credentials get reset so you will need to redo them as above. But for some reason yesterday for me, nothing would connect until I did
Uncheck 'Enable advanced network functionality'
Then it started working again.
Hope this helps others.
I had the same issue today and found a solution.
On my MC92N0 scanner I went into Settings/Control Panel/USBConfig and I had to tap on the 'USB Client Mode.' It was previously selected to port mode 'USB OTG Mode'. After doing this I placed it in the doc again and it connected normallylaunched Windows Mobile Device Center.
Also fyi you should also be able to find the scanner and access files once you're connected by looking underneath devices in 'This PC', similar to how you would access a USB flash drive. I was able to do this on Windows 7 & 8.
In addition to all the other fixes you find on the web, I noticed that the Windows Mobile device will not connect to the Windows Mobile Device Center when I am accessing the Windows machine that runs WMDC through Remote Desktop. Had that problem on Windows 7 and 8.1. The fix for me was to login to the Windows machine first without Remote Desktop after which WMDC will show that the device is connected. Once the connection has been established I could access the machine using Remote Desktop and the Windows Mobile device stayed connected.
I sometimes run into this issues myself.. i just open the WDMC manually then pull the device out of cradle and put it back in and that sometimes fixes the issue..
EDIT: Ok i have found a solution and that involves creating a batch file.. WMDC used to open fine for me until i upgraded to Windows 10 now it only does it when it wants to... See here for details